RC3 remote control
Brand: PISHROBOT23.87$ – 24.07$
Quick Overview
By using RC3, the remote control without interference, you can easily control all kinds of robots such as firefighter robots, soccer player robots, explorer robots, warrior or sumo robots, service robots, robot arms, etc. with only one remote control.
This convenient and widely used remote control can be used with KAIRobot products and many other manufacturers’ products.
The ability to drive and control 4 DC motors and 4 servo motors simultaneously in different control modes is one of the features of this popular remote control.
Description
RC3 remote control
By using RC3, the remote control without interference, you can easily control all kinds of robots such as firefighter robots, soccer player robots, explorer robots, warrior or sumo robots, service robots, robot arms, etc. with only one remote control:
- Number of channels: 18
- Simultaneous control of 4 DC motors
- Differential control of mobile robots
- Simultaneous control of 4 servomotors
- Number of digital inputs/outputs in the receiver: 2
- Ability to activate devices connected to the relay board
- The ability to connect to all kinds of sensors such as contact sensors
- Vibration feedback from the sensors on the transmitter
- Allowable current of each DC motor continuously: Maximum 1.6A
- Permissible current of each DC motor instantaneously: Maximum 3A
- Allowed input voltage of receiver battery: 6V
- Transmitter Power Supply: 3 AAA 1.5V batteries
- Receiver Power Supply: 4 AA 1.5V batteries
- Number of sockets per output: 1
- Socket type: RJ616 socket (compatible with KAI-ROBOT motors)
If you want to use more powerful motors that have higher torque and ultimately higher current or voltage (such as the advanced flanged motor), you can get the EMD22 board.
RC3 Transmitter
RC3 Receiver
Example 1: Tank with Gripper
Connect the tank with gripper to RC3
Introduction to servomotors
Unlike normal motors that rotate continuously, servo motors rotate up to a set angle and then stop, and do not change position as long as they are turned on.
– Servomotors can be used in robot joints to change the angle of the joint.
– With the help of the Select key, you can turn off/on all servomotors.
– You can adjust the angle of each servomotor between 0 and 180 degrees with the help of two keys.
Example 2: Robot with contact sensor
Attention: Do not use KRC pack sensors. If used, the device may be damaged. A/D board can be used to apply analog sensors such as IR sensor or light sensor.
Example 3: Robotic arm with DC motor
To make the arm, you can use some servomotors instead of the dc motors and use the control keys of the servomotors to control it.
Example 4: Soccer robot
In this control method, the motors must be directly connected to the wheel and the device must be in mode 1.
Introducing the relay board
With the help of this board, you can control motors and various electrical devices that work with voltages higher than 6 volts. The maximum allowed current of the relay is 5A.
3 robot samples made with RC3
Stair climber robot
Cleaning robot
Floor cleaning robot
Additional information
| Interface Type | |
|---|---|
| Number of Servo motors | |
| Number of Motors | |
| جریان مجاز | Each motor has a maximum of 1.6 amps continuously and a maximum of 3 amps instantaneously |
| Battery Type | |
| ولتاژ مجاز | |
| نوع سوکت | Motors and sensors: Small phone plug (4P4C or RJ616), Servomotors: Standard socket for RC servomotors |
| فیدبک | The vibration of the transmitter due to the activation of the sensors in the receiver |
| Product Dimension | Dimensions of the receiver: 8.5x8x3 cm, Dimensions of the transmitter: 15.7×9.5×5.5 cm |
| Product Weight | Receiver weight: 80g, Transmitter weight: 156g |
| Country of Origin | |
| Brand/Brands | |
| Other Specifications | Ability to activate devices connected to the relay board, Differential control of mobile robots, Number of digital inputs/outputs in the receiver: 2, Number of radio channels: 18, The ability to connect the receiver to all types of sensors (with output from 0 to 5 volts) |
| Model / Version |
RC4 Bluetooth Remote Control
Reviews
There are no reviews yet.